Dealing with the dead The VGA card of his cooling fan




VGA card or graphic card is one of the components in a computer whose function is to display the image to the screen.
To be able to work well, on any graphics card installed heat sink (pendingain) to remove the heat generated in order not to damage the chip.

In the types of certain VGA card, heat sink equipped with a fan or a fan, with the intention of course to be cooling better, more optimal.

Problems heat sink or cooling fan use is: because the fan rotates mechanically, then over time the rotor or stator section of the fan will wear out, eventually the fan is spinning, and broken.

With VGA card cooling condition is broken, usually the computer will often ngehang, drawing dies, or even a computer will not start at all.


If your computer is using the VGA / graphics card that uses the fan / cooling fan on the chip, and one fan stops spinning (damaged). The most correct way is to replace the graphics card with a new one. But if you do not want to buy, you can still use the VGA card without interruption despite the cooling fan off.



Uninstall / remove the fan off, because there is no better fan / fan of the present but not functioning. there is usually a screw or bolt for anchoring / amplifier, open it with a screwdriver.


Uninstall / remove the fan off, because there is no better fan / fan of the present but not functioning. there is usually a screw or bolt for anchoring / amplifier, open it with a screwdriver.

Once the fan is removed, clean the heat sink of the dirt.
By removing the defective fan, VGA card can be used again, especially if the exhaust fan CPU casing possessed good circulation (big fan casing attached to the CPU), it will be no problem even if the VGA card without using the cooling fan.




Related product you might see:

Share this product :

Post a Comment

 
Support : -V-
Ms.V