Trick Energy Saving PC / Laptop

NineTips and Trick Energy Saving PC / Laptop. Have you ever felt the electricity payment swollen because of the use of computer or laptop every day? Especially now that it uses electrical pulses, of course, we have to be more economically efficient electrical pulses that we not quickly exhausted. So to overcome this, the following AllSoft sharing tips on how to save energy on computers and laptops.



1. Adjust the monitor brightness and contrast
Maybe for the layman or beginner in menggunakankomputer, they rarely pay attention to their monitor settings. What is meant in this case is the level of brightness and contrast were set too high will get to spend a lot of energy. So for that you should be able to adjust the lighting and contrast, to adjust the monitor brightness and contrast using the button under the monitor.

2. Turn off monitor
Tips to-two is to turn off the monitor, especially the monitor type is the type of CRT (Cathode Ray Tubel), because these types of monitors consume more power. So, if you want to leave the PC in a long time, you should turn off your monitor.
You can also set its Windows to automatically direct die within a certain time, it can be done by, click "Control Panel-Options". In "Power Options Properties" tab click the "Power Schemes". Then click the arrow in the "Power Schemes" and select "Home / Office desk". Then select the desired time on the "Turn Off Monitor" and click "Apply" and "OK".

3. Turn off hard disks
Although we are not doing anything on the computer, but your data will always be read from the hard disk (by the operating system and some applications). For this reason, the hard disk hard disk will continue to spin and of course this will consume energy. If you want to leave your PC for a long time, then you should turn off your PC's hard disk. In "Power Options Properties" and then click the tab "Power Schmes". Click the arrows in the "Power Schemes" and select "Home / Off desk". Then click "Turn off hard disks" and select the time. Then click "Apply" and "Ok".

4. Turn off other equipment
Turn off other equipment such as, speakers, external modems, scanners, Zip drives and printers. Because the equipment it is to spend a lot of energy. Often people leave equipment switched on, even when we were out for a long time.

5. Hibernate Mode
Hibernate mode is the facility to shut down, but not shut down or turn off the applications that we are open earlier. This can be done by Mode "Hibernate". With this mode, the contents of main memory (RAM) is stored in the hard disk. How to do hibernate mode are as follows, in "Power Options" tab click on "Hibernate". Then click the box next to "Enable Hibernation". Also click on the "Advanced" tab. In the section "When I Press the power button" and then click the arrows then click "Hibernate". Click "Apply" and "Ok". After that, press the "Power" on your computer. Hibernate mode is working, press the "Power" button again, you will turn on your computer and will automatically open the application you have open earlier.

6. Standby Mode
In order to save energy, we recommend setting the monitor and the hard disk is the most low in standby mode. If you want to leave the PC for a while, you should activate the standby mode. But you should know is, when the active standby mode the data that you have saved can be damaged or lost if your PC is damaged. We recommend that you first save the data or documents before you activate this standby mode. Standby mode can be done by, click the "Start-Turn Off Computer" then click "Stanby".

7. Use UPS
Always use UPS, because this tool can help rescue data or shut down during a power failure. To set up and configure the UPS equipment tool "Power Option Properties" and select the UPS tab. Section status in the UPS tab displays the approximate number of minutes that can be supported by UPS to your PC. Actually a lot of ways to configure the UPS, but this depends on the model and capacity of the UPS is used.

8. Laptop Battery
If you charge a laptop battery, make sure the charge process is complete. Because the charge is done half-half and then resumed, it will instead spend a lot of energy. If you want to travel, you should take the battery always tambaha. To save on battery consumption. You can use the Hibernate feature / Suspended or use an electric socket that plugs into a wall outlet.

9. USB port
If when you make use of the laptop and then you put one into the USB port on your laptop, you should immediately be released when it's finished it. Because the equipment is still stuck in the USB port, it can also be exhausting on your PC or laptop. Should remove the device when pemakainnya thats enough.
10. Energy Consumption Scheme Laptop
Usually laptop manufacturers also include power management features and software. This software is very useful for the consumer laptop, because the software is able to regulate the use of battery and electric power is being used. In this software there are several options that can be used to determine the burden of hard disks and other energy being used by the laptop. Among knowing the speed of the processor or monitor the proper lighting to conserve battery life. This software can simultaneously be a watchdog for us to use the laptop.

Related product you might see: